Jobs Abroad By Brunel Technical Services Philippines Inc.
Company Background:
Brunel Technical Services Philippines, Inc. (BTS) is under the umbrella of Brunel Energy, a division which provides specialized knowledge to the international oil and gas, petrochemical, power generating and the general construction industries. The parent company, Brunel International NV, is a publicly listed company on the Amsterdam Stock Exchange and has over 100 operating offices in different countries.
BTS is committed to and focused on providing “the right knowledge, at the right place, at the right time” and in maintaining this focus has become a global leader within these fields. BTS’s head office is located in Perth Western Australia. From this office BTS liaises and coordinates with its Australian offices located in Singapore, Thailand, the Philippines and Vietnam. BTS can call on any office strategically placed throughout the UK, Europe, North America, Africa, South East Asia, the Middle East and Australia to support, service and provide resources to suit any project requirement.
BTS has the knowledge, experience, resources and operational expertise to provide full logistical support for any project including but not limited to recruitment, training, payroll services, administration management, visa requirements, work permits and other logistical support functions that may be required.
Overseas Jobs For: Test Engineer, RF Product Engineer, Shift Supervisor, Analogue CMOS IC Designer, Characterization Engineer, Digital IC Designer, RF Product Engineers, Analogue layout designer, Characterization Engineer, Drilling Electrician
1. Position: Test Engineer
Location: Netherlands
Vacancy: 3
Qualifications:
Bachelor’s Degree or a higher professional education
Two years experience with industrialization and testing of RF components or IC’s on industrial testers.
Strong analysis capability
Enthusiastic team with good communication skills
Willingness to travel
Experience with Network Analyzer, LabView (GPIB)
45 years old
Male/Female
Responsibilities:
Develop and implement a test plan, i.e. define the required hardware, write software and enable testing in an industrial environment.
Develop and implement new test methods and test tools for RF products on low cost tester platform (Parset)
Initiate cost reduction actions, like test transfer to offshore facilities and test time reduction.
2. Position: RF Product Engineer
Location: Netherlands
Vacancy: 3
Qualifications:
Higher professional education (HBO) in physics, electronics or related field.
Experience with RF and wireless communication techniquesis a pre.
Experience with Product Engineering, yield improvement activities, Datapower usage, cost down activities.
Knowledge of IC process technology, LDMOS processes preferred.
Excellent communication skills, both verbal and in writing.
Enterpreneurial attitude
Enthusiastic team player
45 years old
Responsibilities:
Yield monitoring and yield improvement actions.
Interface with industrial centers inside the organization and/or subcontractors outside the organization in front and back end.
3. Position: Shift Supervisor
Location: China
Qualifications:
College Degree in Engineering or equivalent
Five years of working experience in the related field is required for this position.
Must have experience in LNG project.
Male
Not younger than 35 years old
Full-Time positions available
4. Position: Analogue CMOS IC Designer
Location: Netherlands
Vacancy: 3
Qualifications:
College Graduate
Two years of working experience in the related field is required for this position.
Basic knowledge of analogues CMOS circuits and systems.
Analogue design expereince on system and component level.
Experience with Cadence designs environment.
Experience with analogue simultation programs like Spectre.
Able to make a clear documentation of designs.
Experience with evaluation of analogue circuits.
Clear and concise communication
Male
Not more than 45 years old
Responsibilities:
The Analogue CMOS IC Designer executes the design of analogue circuits of moderate to high complexity in state of the art submicron CMOS IC technologies.
The analogue CMOS IC Designer receives his/her instruction from the design manager and/or from the project leader.
He/she decides on technical aspects of the block and needs to consult the line manager if planning or budgeted consequences arise from such decisions.
The analogue CMOS IC Designer works according to the organization Quality Management systems and follows the relevant design rules for the type of designs and technology.
5. Position: Characterization Engineer (Netherlands)
Location: Netherlands
Vacancy: 3
Qualifications:
College Degree in Engineering or equivalent.
Two years of working experience in the related field is required for this position.
Relevant experience in required application domain.
Several years experience in RF testing and technical development.
Bachelor’s education in the relevant technical discipline or has reached this level through another form of training or experience
Knowledge of and experience in RF measurement techniques.
Good communication skills, both verbal and written in English.
Disciplined team worker
Pro-active, hands on mentally
Quality conscious, aware of the need for a good working atmosphere.
Inspiring confidence, ability to inspire and empathize.
Communicative in all layers of the organization, orally and in writting.
Result oriented, business-minded
Male
Not more than 45 years old
Responsibilities:
Main task of the Characterization Engineer is to provide measurements results from an RF set-up (power weep, load pull) and /or IR set-up, for a full range of RF products.
The gathered data will be interpreted and documented before reporting to the responsible (lead) engineer of the measured device.
Provide a user friendly characterization environment / platform to supper designers.
6. Position: Digital IC Designer
Location: Netherlands
Vacancy: 3
Qualifications:
Masters Degree in Electrical Engineering
Knowledge of digital CMOS circuits and systems, 5 years
Front-end RTL/VHDL design and top level verification, 3-5 years
Fluent in English
Good communicator and team worker with 5 years experience
Male
Not more than 45 years old
Responsibilities:
The Digital CMOS IC Designer executes the design of digital circuits of moderate to high complexity in state of the art submicron CMOS IC technologies.
The digital CMOS IC Designer receives his/her instructions from the design manager and/or from the project leader.
He/she decides on technical aspects of the block and needs to consult the line manager if planning or budget consequences arise from such decisions.
The Digital CMOS IC Designer works according to the organization Quality management system and follows the relevant designs rules for the type of design and technology.
7. Position: RF Product Engineers
Location: Netherlands
Qualifications:
Higher professional education (HBO) in physics, electronics, or related fields
Experience with RF and Wireless communication techniquesis a pre.
Experience with Product Engineering, yield improvement activities, Datapower usage, cost down activities.
Knowledge of IC process technology, LDMOS processes preferred.
Excellent communication skills, both verbal and in writing.
Entrepreneurial attitude
Enthusiastic team player
Responsibilities:
The Product Engineer (PE) contributes to the validation, qualification and characterization of new products in the Business Creation Process.
Furthermore you will act as liaison between the product line and the wafer, test and assembly fabs with respect to activities related to the Business Fulfillment Process.
Typical activities are:
Yield monitoring and yield improvement actions
Interface with industrial centers inside the organization and/or subcontractors outside the organization in frond- and back end.
Cost reduction activities
8. Position: RF / Analogue layout designer
Location: Netherlands
Qualifications:
HBO electronics or comparable degree
Experience with Cadence design tools
Two years RF layout design experience
Parasitic extraction knowledge
Technology knowledge
Good communication skills
Flexible, enterprising and team player
Immune to stress
Responsibilities:
You are responsible for the delivery of a fully verified layout design, which meets all technical requirements provided by the electrical designer.
The standard flow within RF and analogue layout design exists of floor planning, placement, (top level) routing, verification, extraction and design finishing.
This is done in a Cadence design environment combined with appropriate tool and process knowledge.
A team, that exists of a number of designers, is assigned to design projects, the number of designers depends on the complexity, size and deadline of the project.
9. Position: Characterization Engineer
Location: Netherlands
Qualifications:
Experience in working in teams.
Relevant experience in required application domain.
Several years experience in RF testing and technical development.
Bachelor’s education in the relevant technical discipline or has reached this level through another form of training or experience.
Knowledge of and experience in RF measurement techniques.
Good communication skills, both verbal and written in English.
Disciplined team worker
Pro-active, hands-on mentality
Quality-conscious, aware of the need for a good working atmosphere.
Inspiring confidence, ability to inspire and empathize.
Communicative in all layers of the organization, orally and in writing.
Result-oriented, business-minded.
Responsibilities:
Main task of the Characterization Engineer is to provide measurements results from an RF set-up (power sweep, load pull) and / or IR set-up, for a full range of RF products.
The gathered data will be interpreted and documented before reporting to the responsible (lead) -engineer of the measured device.
Provide a user friendly characterization environment / platform to support designers.
10. Position: Drilling Electrician
Location: Singapore
Vacancy: 8
Qualifications:
College Graduate
Four years of working experience in the related field is required for this position.
Candidates should have related experience in Drilling Services in Oil and Gas Industry (Offshore).
Must have valid BOSIET, Seaman’s Book and Passport
For Equitorial Guinea deployment
42 days on/21 days off (off not paid)
Male
Not more than 55 years old
Brunel Technical Services Philippines Inc.
POEA License#: 003-LB-012909-R
2/f BCC House 5046 P. Burgos St., Poblacion, Makati City, Philippines 1210
Tel. No.: +632 8992229; +632 8993770; +632 8904221
Apply Online: http://www.brunelenergy.net/jobs
Contact Online: http://www.brunelenergy.net/contact
Website: http://www.brunelenergy.net/
